Mustang V6-232 3.8L VIN 3 TBI (1984)
^
Remove hold-down clamp at left-hand side rail.
^
Remove hose connection at power steering pump.
^
Using a Rotunda Tube Bender (021-00022) with a 1" radius or equivalent, carefully bend the metal tube portion 3/8" O.D. of the hose, as shown in
View A, making sure not to kink any portion of the tube.
^
Relocate the hold-down clamp as shown in Figure 11, reconnect the hose at the power steering pump, and tighten fitting to 10-25 ft.lbs. When
installed properly, the hose will not have any tight bends and will not contact the coolant recovery bottle.
^
Add power steering fluid as necessary, start engine, and check for leaks.
NOTE:
If the power steering hose requires replacement, service hose E3SZ-3A719-B should be obtained.
PART NUMBER
PART NAME
CLASS
E3DZ-19B969-A
A/C Engine Component Kit
PA
E3SZ-3A719-B
Power Steering Hose
A
OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: "INFORMATION ONLY"