Mustang V6-232 3.8L VIN 3 TBI (1984)
FIGURE 18
3.
Disconnect the auxiliary cooler-in line and the auxliary cooler-out line on the side of the "H" fitting closest to the auxiliary cooler. (Refer to the
typical
passenger car, truck, and Econoline illustrations, (Figures 15 through 18). This is the field fix installation; production installation may vary.)
4.
Set up the cleaner by attaching the cleaning hoses to the auxiliary cooler hoses. Some applications may require inserting a section of cooler line
tube in the auxiliary cooler hose in order to attach the cleaning hoses.
5.
Flush the auxiliary cooler.
6.
Blow air through all the lines to remove residual cleaning fluid.
7.
Reconnect all fittings.
8.
Check for leaks.
OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: "INFORMATION ONLY"
