Mustang V6-4.0L VIN N (2006)
Rocker Arm Assembly: Service and Repair
Camshaft Roller Follower
Camshaft Roller Follower
Special Tool(s)
Material
Removal and Installation
1. Remove the fuel rail. For additional information, refer to Fuel Delivery and Air Induction.
2. Remove the LH and RH valve covers.
3. Rotate the crankshaft until the camshaft for the cylinder being serviced is at base circle.
4. NOTE: Mark the position of the camshaft roller followers so they can be installed in their original positions.
Using the special tool, remove the camshaft roller followers.
