ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Air Bag Disarming and Arming|Page 9604 > < Air Bag Disarming and Arming|Page 9602
Page 6
background image

All vehicles
1. Remove RCM fuse 17 (10A) from the SJB.
2. Disconnect the battery ground cable and wait at least 1 minute.

Vehicles with seat side air bags

3. Remove the restraint system diagnostic tool from the vehicle harness side of the driver side air bag module electrical connector.

4. Connect the driver side air bag module electrical connector and reset the red locking tab.

5. Remove the restraint system diagnostic tool from the vehicle harness side of the passenger side air bag module electrical connector.

6. Connect the passenger side air bag module electrical connector and reset the red locking tab.

Air Bag Disarming and Arming|Page 9604 > < Air Bag Disarming and Arming|Page 9602