Mustang V6-4.0L VIN N (2006)
10. Attach the restraint system diagnostic tools to the clockspring electrical connectors at the top of the steering column.
11. Fully lower the glove compartment door.
12. Disconnect the passenger air bag module electrical connector.
13. Attach the restraint system diagnostic tool to the vehicle harness side of the passenger air bag module electrical connector.
Vehicles without seat side air bags
14. CAUTION: Do not deactivate the seat side air bag module circuit by removing the seat side air bag bridge resistor from the seat side air
bag electrical connector.
If the seat side air bag bridge resistor is removed, an open circuit fault will be generated by the RCM.
If a restraint system diagnostic tool is installed at the seat side air bag electrical connector, a low resistance fault will be generated by the RCM.
Vehicles with seat side air bags
