Mustang V8-302 5.0L (1982)
NOTE:
To aid in installation, tie a string to the door alignment pin catch plate to make sure it does not drop inside the quarter panel.
27.
Install door alignment pin catch and door alignment pin catch plate on each door "B" pillar with the bolts provided.
28.
Make any necessary adjustments to the door alignment pin catch and door alignment pin catch plate.
29.
Reposition "B" pillar seals and pop rivet to secure.
30.
Reinstall both interior door trim panels.
PART NUMBER
PART NAME
CLASS
E7ZZ-6123042-A
Door Alignment Kit -
C
Convertible
E7ZZ-6123042-B
Door Alignment Kit -
C
"T" Roof
D8AZ-19515-B
Super Seal
AM
Anti-Corrosion Compound
OTHER APPLICABLE ARTICLES: 84-18-5, 83-15-3, 82-25-5
WARRANTY STATUS: Eligible Under Basic Warranty Coverage
OPERATION: 880202A
TIME:
3.4 Hrs. - "T" Roof Models 4.5 Hrs. - Convertible Models DLR. CODING: Basic Part No. 7023042
Code:
63
Technical Service Bulletin # 8822
Date: 880120
Convertible/T-Top - Water Leaks/Wind Noise
^
WINDNOISE - "T" ROOF AND CONVERTIBLES
^
LEAKS - WATER - "T" ROOF AND CONVERTIBLES
Article No. 88-2-2
FORD:
1982-86 MUSTANG
LINCOLN-MERCURY: 1982-86 CAPRI
ISSUE:
Windnoise and water leaks on "T" roof and convertible models may be caused by mis-aligned (sagging) doors. The sagging doors will not
allow the front door glass to properly seal against the weatherstrip assemblies.
ACTION:
To correct this, install a door alignment kit. Two (2) door alignment kits are available for service, one for "T" roof models and the other for
convertible models. Refer to the following service procedure for detailed installation procedures.
CONVERTIBLE MODEL DOOR ALIGNMENT KIT (E7ZZ-6123042-A)
Qty.
Contents Description
2
Bracket - floor, sides outer member, right and left
2
Tork Box - sidemember to front sidemember,
right and left
2
Reinforcement - floor sidemember, rear,
right and left
120
1/4" black rivets
2
Pin - door alignment
2
Catch - door alignment
2
Bushing - door alignment pin catch
4
Nuts
8
Bolts
"T" ROOF MODEL DOOR ALIGNMENT KIT (E7ZZ-6123042-B)
Qty.
Contents Description
