Mustang V8-302 5.0L (1982)
Fig. 17 Rack piston seal installation. Capri, Mustang
Fig. 18 Positioning protective sleeves on rack. Capri, Mustang
Assemble
1.
Position oil seal on tool No. T74P-3504-D, or equivalent, with lip spring facing tool. With gear in vertical position, insert tool into right side bore
of gear housing, Fig. 16. Tap handle of tool until seal bottoms in housing. Use care not to cock handle when installing seal. If tool binds in area of
left turn pressure port, align flat on tool with pressure port. A scribed line on tool handle will aid in aligning flat with pressure port.
