Mustang V8-302 5.0L CFI HO (1985)
1.
For 6 inches either side of the suspected leak area, pull the weatherstrip out of the hatch channel.
2.
Install a layer of 1/2 inch x 1-1/6 inch butyl tape along the bottom of the weatherstrip channel.
Figure 96
3.
Apply a 1/4 inch bead of Weatherstrip Adhesive, COAZ-19552-A, along the center of the butyl tape.
4.
Seat the weatherstrip in the channel.
5.
Install the hatches.
6.
Repeat the water test.