Mustang V8-302 5.0L CFI HO (1985)
3.
Cut two slots (.750" x 1.50") in the hood insulator as shown.
4.
Install two clips as shown.
5.
Remove one (1) push pin at center of the hood insulator as shown.
6.
Clear or remove burred inside the push pin hole.
7.
Cut off the tip of the new push pin (N803387-S) - two (2) threads down from the tip.
8.
Install the new push pin to replace the old push pin as shown.
PART NUMBER
PART NAME
CLASS
352976-S32
Clip (.64" ID and .91"
SG
length) two (2) per vehicle
(5 per pkg.)
N803387-S
Push Pin - one (1) per
BS
vehicle (25 per pkg.)
OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: Reimbursable within the provisions of the Warranty and Policy Manual.
OPERATION: SP16738A85
TIME:
0.3 Hr. DLR. CODING: Basic Part No. 9600 - Code: 59