Mustang V8-302 5.0L CFI HO (1985)
g. Remove two console to rear floor bracket retaining screws.
h. Insert a small screwdriver into two notches at bottom of front upper finish panel and snap out, Fig. 4.
i.
Remove radio, then using a small screwdriver pry radio finish cover from front of console.
j.
Open glove compartment door and drop glove compartment assembly down. If equipped with remote control fuel filler door, switch must be
removed. Remove two instrument panel to console retaining screws.
k. Remove four console to bracket retaining screws.
l.
Remove console from the vehicle.
8. Snap out defroster grille, then remove screws from speaker covers and snap out.
9. Remove four steering column brace to cowl side retaining screws.
10. Remove right and left side cowl panels.
11. Remove cowl side retain bolts from each side of the panel, Fig. 5.
12. Remove brake pedal support nut, then five cowl top screw attachments.
13. Gently pull instrument panel away from cowl, then disconnect air conditioning controls and wire connectors.
14. Remove instrument panel from vehicle.
15. Reverse procedure to install.
