Mustang V8-302 5.0L COBRA (1995)
EGR Valve: Service and Repair
EGR Valve
REMOVAL
^
Remove air cleaner outlet tube.
^
Disconnect EGR valve emission vacuum control hose from EGR valve.
^
Disconnect fuel charging wiring from EGR valve.
^
Disconnect EGR valve to exhaust manifold tube from EGR valve.
^
Remove EGR valve retainer nuts and EGR valve from upper intake manifold.
^
Remove EGR valve gasket and clean residue from upper intake manifold sealing surface.
INSTALLATION
^
To install, reverse removal procedure. Tighten EGR valve retaining nuts to 12-18 Nm (106-159 in lb). Tighten EGR valve to exhaust
manifold tube nut to 41 Nm (30 ft lb).