Mustang V8-302 5.0L COBRA (1995)
Seat Belt Buckle: Service and Repair
Special Service Tools Desired
Seat Belt Bolt Bit (#50 Torx) .......................................................................................................................................................................... T77L-2100-A
REMOVAL
1. Position front seat forward to reach front safety belt buckle end.
2. Remove front safety belt buckle end retaining bolt. On LH side, disconnect safety belt buckle switch connector.
INSTALLATION
1. To install, reverse Removal procedure.
2. Tighten front safety belt buckle end retaining nut to 30-40 Nm (22-30 lb ft).
3. Check the restraint system for proper operation.
