Mustang V8-302 5.0L HO (1987)
Speaker: All Technical Service Bulletins
Speaker Grille - Removal Procedure
Article No. 86-19-1
TRIM - INTERIOR - SPEAKER GRILLE - REMOVAL PROCEDURE
FORD 1987 MUSTANG
Figure 1
Radio speaker grilles mounted on the instrument panel are held in place by two spring clips and one screw on the lower outboard edge. Damage will
occur to the instrument panel if the edges of the grilles are pried on to disengage the clips. To remove the grilles, a hooktype tool must be made (Figure
1) and inserted in the notch located near the top edge of the grille.