ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Control Module HVAC > < Air Conditioning - Approved Flushing Procedures|Page 5803
Page 1
background image

Control Assembly: Service and Repair

Fig. 13 Control panel removal

1.

Disconnect battery ground cable.

2.

Remove floor console snap-in trim molding to gain access to control panel attaching screws.

3.

Remove control panel attaching screws, Fig. 13.

4.

Pull control panel out of console and disconnect electrical connectors, vacuum lines and temperature control cable.

5.

Remove control panel from vehicle.

6.

Reverse procedure to install. 

Control Module HVAC > < Air Conditioning - Approved Flushing Procedures|Page 5803