Mustang V8-302 5.0L HO (1987)
Suspension Strut / Shock Absorber: Service and Repair
Rear
Fig. 6 Typical rear suspension
On hatchback models, the upper shock absorber upper mounting is accessible from the luggage compartment. On hatchback and fastback models,
remove side panel trim covers to gain access to the upper shock absorber mounting.
1.
Disconnect shock absorber from upper mounting.
2.
Raise vehicle and support rear axle.
3.
Compress shock absorber to clear hole in upper shock absorber tower.
4.
Disconnect shock absorber from lower mounting and remove shock absorber from vehicle.
5.
Reverse procedure to install.
