Mustang V8-302 5.0L HO (1987)
Clutch Pedal Assembly: Service and Repair
Clutch Pedal Assembly Removal
1. Remove starter/clutch interlock switch as outlined.
2. Remove clutch pedal retaining nut.
3. Pull clutch pedal off the clutch pedal shaft.
Installation
1. Align the square hole of the clutch pedal with the clutch pedal shaft and push the clutch pedal on.
2. Install the clutch pedal retaining nut and tighten to 23-36 Nm (17-26 lb-ft).
3. Install starter/clutch interlock switch as outlined in Starting and Charging/Starting System/Clutch Pedal Position Switch.