Mustang V8-302 5.0L HO (1987)
Synchronizer Ring: Technical Service Bulletins
M/T - Hummer 5 Speed Mainshaft Revision
TRANSMISSION - HUMMER 5-SPEED - REVISED
Article No.
OUTPUT SHAFT KIT FOR SERVICE
87-4-12
MERKUR 1985-86 XR4Ti
ISSUE:
The transmission mainshaft/output shaft used in the Hummer 5-speed for Merkur XR4Ti was revised effective with transmissions built after
10/01/85.
ACTION:
Repairs to transmission built prior to this date that require a new output shaft, must be serviced with a kit which includes an output shaft, 3-4
synchronizer assembly and a 5th gear synchronizer hub. The kit part number is E6RY-7061-B.
NOTE:
The new 3-4 synchronizer and 5th gear synchronizer hub are serviced individually and can be used on both levels of output shafts for service.
PART NUMBER
PART NAME
CLASS
E6RY-7061-B
Output Shaft Kit
C
OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: "INFORMATION ONLY