Mustang V8-4.6L (2009)
Radio/Stereo: Removal and Replacement
Satellite Digital Audio Receiver System (SDARS) Module
Removal and Installation
1. NOTE: Module configuration is only required if a new Satellite Digital Audio Receiver System (SDARS) module is being installed.
Upload the SDARS module configuration information to the scan tool.
2. Set the RH luggage compartment trim aside.
-
Remove the push-pins, as required.
3. NOTE: When installing the nuts, tighten the 2 rear nuts before tightening the front 2 nuts.
Remove the 4 nuts and the SDARS module.
-
Disconnect the electrical connectors.
-
To install, tighten the nuts to 7 Nm (62 lb-in).
4. To install, reverse the removal procedure.
-
Download the configuration information to the SDARS module.
