Mustang V8-4.6L (2009)
1. For additional information, refer to the procedures.
Brake Disc
Brake Disc
Removal
1. Remove the wheel and tire.
2. NOTICE: Care must be used when servicing rear brake components without disconnecting the parking brake cable from the brake
caliper lever. Carefully position the caliper aside using a suitable support or damage to the parking brake cable end fittings may occur.
NOTICE: Do not allow the brake caliper and anchor plate assembly to hang from the brake hose or damage to the hose may occur.
Remove and discard the 2 anchor plate bolts and position the brake caliper anchor plate and brake caliper assembly aside.
-
Support the caliper using mechanic's wire.
3. Remove the brake disc.
Installation