Mustang V8-4.6L (2009)
Wheel Speed Sensor: Service and Repair
Wheel Speed Sensor - Rear
Wheel Speed Sensor - Rear
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Disconnect the wheel speed sensor electrical connector.
3. Disconnect the 2 wheel speed sensor harness pin-type retainers.
4. Disconnect the wheel speed sensor grommet retainer from the brake hose clip.
5. Remove the wheel speed sensor bolt.
-
To install, tighten to 15 Nm (133 lb-in).
6. Remove the wheel speed sensor.
7. To install, reverse the removal procedure.
