Mustang V8-4.6L (2009)
4. Repeat the previous 2 steps for each roller follower being serviced.
5. Inspect the roller follower.
Installation
1. NOTICE: If the components are to be reinstalled, they must be installed in their original positions. Mark the components for installation
into their original locations. Failure to follow these instructions may result in engine damage.
NOTE: Lubricate the roller follower with clean engine oil.
Using the Valve Spring Compressor, compress the valve spring and install the camshaft roller follower.
2. Repeat the previous step for each roller follower being serviced.
3. Depending on the valve being serviced, install the LH or RH valve cover. For additional information, refer to Valve Cover - LH See: Valve
Cover/Service and Repair/Valve Cover - LH or Valve Cover - RH See: Valve Cover/Service and Repair/Valve Cover - RH.
