Mustang V8-4.6L (2009)
Drive Belt Tensioner: Service and Repair
Accessory Drive Belt Tensioner
Accessory Drive Belt Tensioner - 4.6L (3V)
Removal and Installation
Bullitt vehicles
1. Remove the air cleaner outlet tube.
All vehicles
2. Using a suitable belt tensioner release tool, rotate the accessory drive belt tensioner clockwise and remove the accessory drive belt from the
accessory drive belt tensioner.
3. Remove the 3 bolts and the accessory drive belt tensioner.
-
To install, tighten to 25 Nm (18 lb-ft).
4. To install, reverse the removal procedure.
