Mustang V8-4.6L (2009)
6. Remove the engine mount bracket-to-engine mount nut.
-
To install, tighten to 63 Nm (46 lb-ft).
7. Remove the 3 engine mount bracket bolts and remove the bracket.
-
To install, tighten to 80 Nm (59 lb-ft).
8. Remove the 2 engine mount bolts and the engine mount.
-
To install, tighten to 70 Nm (52 lb-ft).
9. To install, reverse the removal procedure.
Engine Mount - RH
Engine Mount - RH
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Disconnect the battery ground cable.