Mustang V8-4.6L (2009)
4. Loosely install the bolts, then tighten the bolts in 2 stages, in the sequence shown.
-
Stage 1: Tighten to 20 Nm (177 lb-in).
-
Stage 2: Tighten an additional 60 degrees.
5. Lubricate the engine front cover and the crankshaft front oil seal inner lip with clean engine oil.
6. Using the Crankshaft Vibration Damper Installer, Crankshaft Front Oil Seal Installer and the Front Cover Oil Seal Installer, install the crankshaft
