Mustang V8-4.6L (2009)
16. Connect the RH CMP sensor electrical connector.
17. Install the RH radio ignition interference capacitor and the nut.
-
Tighten to 25 Nm (18 lb-ft).
18. Connect the upper coolant hose to the engine.
19. Install the RH valve cover. For additional information, refer to Valve Cover - RH See: Cylinder Head Assembly/Valve Cover/Service and
Repair/Valve Cover - RH.
20. Install the LH valve cover. For additional information, refer to Valve Cover - LH See: Cylinder Head Assembly/Valve Cover/Service and
Repair/Valve Cover - LH.
21. Install the accessory drive belt tensioner and 3 idler pulleys.
22. Fill the crankcase with clean engine oil.
23. Install the engine coolant degas bottle.
