ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Fog/Driving Lamp Relay > < Fog/Driving Lamp Bulb|Service and Repair
Page 2
background image

NOTE: Make sure the headlamp switch and the ignition switch are in the OFF position.

4.0L and 4.6L vehicles

1. Remove the front bumper cover.

2. Disconnect the electrical connector and remove the fog lamp bulb.

5.4L vehicles

3. With the vehicle in NEUTRAL, position it on a hoist.

4. Release (squeeze) the tabs and remove the fog lamp bulb.

-

Disconnect the electrical connector.

All vehicles

5. To install, reverse the removal procedure.

Fog/Driving Lamp Relay > < Fog/Driving Lamp Bulb|Service and Repair