ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 6976 > < Initial Inspection and Diagnostic Overview|Page 6974
Page 4
background image

-

Is the resistance greater than 10,000 ohms?

Yes

GO to N9.

No

For a front lamp or front side marker, GO to N7.

For all others, REPAIR the circuit in question. CLEAR the DTCs. REPEAT the self-test.

-------------------------------------------------
N7 CHECK THE PARKING LAMP VOLTAGE SUPPLY CIRCUIT FOR A SHORT TO GROUND (BEC TO SJB)

-

Disconnect: BEC C1035a.

-

Measure the resistance between the inoperative parking lamp, harness side and ground as follows:

-

Is the resistance greater than 10,000 ohms?

Yes

REPAIR the circuit in question. CLEAR the DTCs. REPEAT the self-test.

No

GO to N8.

-------------------------------------------------
N8 CHECK THE PARKING LAMP VOLTAGE SUPPLY CIRCUIT FOR A SHORT TO GROUND (BEC TO FRONT LAMP)

-

Disconnect: BEC C1035c.

-

Measure the resistance between the inoperative parking lamp, harness side and ground as follows:

Initial Inspection and Diagnostic Overview|Page 6976 > < Initial Inspection and Diagnostic Overview|Page 6974