Mustang V8-4.6L (2009)
For all others, REPAIR the circuit in question. CLEAR the DTCs. REPEAT the self-test.
-------------------------------------------------
N10 CHECK THE PARKING LAMP VOLTAGE SUPPLY CIRCUIT FOR AN OPEN (SJB TO BEC)
-
Disconnect: BEC C1035a.
-
Measure the resistance between the BEC, harness side and the SJB, harness side as follows:
-
Is the resistance less than 5 ohms?
Yes
GO to N11.
No
REPAIR the circuit in question. CLEAR the DTCs. REPEAT the self-test.
-------------------------------------------------
N11 CHECK THE PARKING LAMP VOLTAGE SUPPLY CIRCUIT FOR AN OPEN (BEC TO LAMP)
-
Disconnect: BEC C1035c.
-
Measure the resistance between the inoperative parking lamp, harness side and the BEC, harness side as follows:
-
Is the resistance less than 5 ohms?
Yes
INSTALL a new BEC. CLEAR the DTCs. REPEAT the self-test.
No
REPAIR the circuit in question. CLEAR the DTCs. REPEAT the self-test.
-------------------------------------------------
N12 CHECK FOR CORRECT SJB OPERATION
-
Disconnect all the SJB connectors.
-
Check for:
-
corrosion
-
damaged pins
-
pushed-out pins
-
Connect all the SJB connectors and make sure they seat correctly.
-
Operate the system and verify the concern is still present.
-
Is the concern still present?
Yes
