Mustang V8-4.6L (2009)
-
Measure the resistance between the PCM C175b-23, circuit 1828 (PK/LG), harness side and the DLC C251-14, circuit 1828 (PK/LG), harness
side.
-
Are the resistances less than 5 ohms?
Yes
CONNECT the negative battery cable. GO to K19.
No
REPAIR the circuit in question. CONNECT the negative battery cable. CONNECT the PCM. CLEAR the DTCs. REPEAT the network test with the
scan tool.
-------------------------------------------------
K8 CHECK THE HS-CAN CIRCUITS BETWEEN THE IC AND THE DLC FOR AN OPEN
-
Disconnect: IC C220.
-
Measure the resistance between the IC C220-18, circuit 1827 (WH/LG), harness side and the DLC C251-6, circuit 1827 (WH/LG), harness side.
-
Measure the resistance between the IC C220-17, circuit 1828 (PK/LG), harness side and the DLC C251-14, circuit 1828 (PK/LG), harness side.
-
Are the resistances less than 5 ohms?
Yes
CONNECT all modules. CONNECT the negative battery cable. GO to K21.
No
REPAIR the circuit in question. CONNECT all modules. CONNECT the negative battery cable. CLEAR the DTCs. REPEAT the network test with the
scan tool.