Mustang V8-4.6L (2009)
5. Disconnect the fuel vapor tube assembly-to-Evaporative Emission (EVAP) canister tank tube quick connect coupling.
6. Disconnect the fuel vapor tube assembly-to-fuel tank filler pipe recirculation tube quick connect coupling.
7. Remove the fuel vapor tube assembly bracket bolt.
-
To install, tighten to 5 Nm (44 lb-in).
8. Release the fuel vapor tube assembly retainer clip.
9. Release the EVAP canister assembly vapor tube retainer clip.
10. Release the 4 fuel tube bundle assembly retainer clips.
11. Remove the fuel vapor tube assembly.
12. To install, reverse the removal procedure.
-
Carry out the Evaporative Emission System Leak Test. For additional information, refer to Evaporative Emission System Leak Test See:
Testing and Inspection.
