Mustang V8-4.6L (2009)
4. Loosely install the transmission support insulator bolt.
5. NOTE: The transmission support insulator must be neutralized.
Slide the transmission support insulator forward, rearward and side-to-side until the gaps between the transmission support insulator and the
transmission crossmember are equal.
6. With the transmission support insulator neutralized, tighten the transmission crossmember bolts.
-
Tighten to 63 Nm (46 lb-ft).
7. With the transmission support insulator neutralized, tighten the transmission support insulator bolt.
-
Tighten to 70 Nm (52 lb-ft).
