Mustang V8-4.6L (2009)
-
To install, tighten the new nut to 103 Nm (76 lb-ft).
4. If necessary, remove the dust boot and jounce bumper.
5. Remove the upper mount assembly.
6. Carefully release the tension on the spring compressor and remove the spring.
7. When installing the spring onto the strut, make sure the spring end is positioned against the seat stop and is resting in the spring seat pocket.
8. To assemble, reverse the disassembly procedure.
-
Align the notch on the upper bearing assembly with the clevis at the bottom of the strut.