Mustang V8-4.6L (2009)
3. Disconnect the Heated Oxygen Sensor (HO2S) connectors and retaining clip from the RH transmission fluid pan rail and then position the
connectors aside.
4. Remove the HO2S connector from the front of the transmission fluid pan rail.
5. NOTE: The transmission fluid pan gasket is reusable, clean and inspect for damage. If not damaged, the transmission fluid pan gasket should be
reused.
Remove the transmission fluid pan and transmission fluid pan gasket.
6. Remove and discard the transmission fluid filter.
Installation
1. Clean and inspect the transmission fluid pan and magnet.
