Mustang V8-4.6L (2009)
7. Connect the HO2S connector and install the sensor wire retaining clip to the RH side of the transmission fluid pan rail.
8. Install the transmission fluid pan drain plug.
-
Install a new transmission fluid pan drain gasket onto the transmission fluid pan drain plug assembly.
-
Tighten to 26 Nm (19 lb-ft).
9. NOTE: It will be necessary to hold the transmission fluid pan drain plug with a wrench when removing the transmission fluid pan drain plug
(short hex).
NOTE: Use a 3/16-inch Allen key to remove the transmission fluid pan drain plug (short hex).
Remove the transmission fluid pan drain plug (short hex).
10. Carry out the transmission fluid level check. Refer to Transmission Fluid Level Check See: Service and Repair/Procedures/Transmission Fluid
Level Check.