Mustang V8-4.6L (2009)
5. Remove the 2 transmission selector lever cable bracket bolts from the transmission and remove the bracket.
Installation
1. Install the transmission selector lever cable bracket and install the 2 bolts.
-
Tighten to 28 Nm (20 lb-ft).
2. Install the transmission selector lever cable eyelet onto the transmission manual control lever.
3. NOTE: It is necessary to install a new plastic transmission selector lever cable retaining clip prior to installation.
Install the transmission selector lever cable into the transmission selector lever cable bracket.
4. Install the transmission selector lever cable onto the selector lever and lock the selector lever cable adjustment lock.