Mustang V8-4.6L (2009)
All vehicles
4. NOTE: Use a backup wrench to hold the case fitting secure.
Remove the transmission fluid cooler tube nuts from the transmission.
5. Remove both transmission fluid cooler tube quick connect secondary latches.
6. Using the Transmission Cooler Line Disconnect Tool, disconnect both transmission cooler tubes from the transmission fluid cooler hoses.
Installation
4.6L engines
1. Loosely install the transmission fluid cooler tube bracket and nut to the engine.
4.0L engines
2. Loosely install the transmission fluid cooler tube bracket and bolt to the engine.
