Mustang V8-4.6L (2009)
Fluid - M/T: Service and Repair
TR3650
Transmission Draining and Filling
Drain Plug And Fill Plug (Part 1)
Drain Plug And Fill Plug (Part 2)
1. With the vehicle in NEUTRAL, position it on a hoist.
2. NOTE: Drain the transmission while the transmission fluid is warm.
NOTE: Position a drain pan under the transmission.
Remove the drain plug and drain the transmission fluid.
Drain Plug
3. Clean the drain plug. Apply threadlock and sealer and install the drain plug.
-
Tighten to 27 Nm (20 lb-ft).
4. NOTE: Prior to removal, clean the area around the fill plug.
Remove the fill plug.