Mustang V8-4.6L (2009)
4. If reinstalling the original quarter window glass, remove the urethane adhesive from the quarter window glass.
5. Using a clean shop towel, brush or oil-free compressed air, clean the pinch weld area. Remove any foreign material or water that may have entered
during quarter window removal.
6. If reinstalling the same quarter window glass, remove the remaining urethane adhesive from the glass leaving a thin layer to bond with the new
urethane adhesive bead.
7. If installing a new quarter window glass, clean the inside of the glass surface with glass cleaner to make sure the ceramic-coated area is clean.
8. NOTE: Be sure to use the same brand and cure-rate products for the urethane adhesive and glass primer. Do not mix different brands of urethane
adhesive and glass primer. Refer to the Material Chart in the procedure.
If installing a new quarter window glass, apply glass primer according to manufacturer's instructions. Allow at least 6 minutes to dry.
9. Cut the urethane adhesive applicator tip to specification. This will produce a triangular bead during application.