Mustang V8-4.6L DOHC (1996)
Lower Intake Manifold Tightening Sequence
7. Install bolts seven, eight, nine and ten. Do not tighten bolts at this time.
8. Install remaining bolts and stud bolts, then hand tighten all bolts and stud bolts.
9. Tighten bolts and stud bolts to 15-22 ft lb in sequence.
10. Torque lower intake manifold W/IMRC to intake manifold bolts to 5.9-8.8 ft lb.
11. Connect IMRC cables and levers.
12. Connect fuel manifold and fuel injector wiring connectors, then install retaining clips.
13. Install upper intake manifold.
