Mustang V8-4.6L DOHC (1996)
LH Camshafts Keyways
3. Install Camshaft Positioning Tool T93P-6256-A into D-slots on rear of camshafts to position both intake and exhaust camshafts with the keyways
pointing down towards crankshaft.
4. NOTE: Do not remove Camshaft Holding Tool T93P-6256-AH from camshafts until all parts are installed and tightened.
Install Camshaft Holding Tool T93P-6256-AH on center of camshafts.
5. If removed, install LH secondary timing chain tensioner. Tighten retaining bolts to 8-12 Nm (70-106 in/lb).
