Mustang V8-4.6L DOHC (1996)
RH Timing Chain Tensioner
8. Remove bolt retaining RH timing chain tensioner arm (6L253) and remove timing chain tensioner arm.
9. NOTE: Two bolts retaining the timing chain guide (6K297) to the cylinder head are longer than the one to the cylinder block (6010).
Remove three bolts retaining RH timing chain guide and remove timing chain guide.
10. NOTE: Do not loosen the camshaft sprocket bolts.
Remove RH primary timing chain from camshaft sprocket (6256) and crankshaft sprocket (6306).
11. Remove RH crankshaft sprocket (6306) and RH primary timing chain.
12. CAUTION: Failure to use Camshaft Holding Tool T93P-6256-AH while removing or tightening camshaft bolts may result in damage to camshaft
D-slots or Camshaft Positioning Tool T93P-6256-A.
If it is necessary to remove primary or secondary camshaft sprockets or secondary timing chain tensioners, install camshaft torquing tool at center
area of camshafts.
