Mustang V8-4.6L DOHC (1996)
7.
Install the Tensioner Positive Stop (F7ZZ-19A439-AA) onto the two (2) studs that mount the tensioner. Fasten the stop bracket with two (2) Nuts
(N804178-S309). Torque the nuts to 20-30 N-m (15-22 lb-ft). Refer to Figure 4.
8.
On the bottom of the power Steering pump there is a power Steering line orientation clip that is mounted with a Single fastener Remove and
discard the clip Install the replacement Power Steering Orientation Clip (F7ZZ-3E523-AA).
PART NUMBER
PART NAME
F6ZZ-8509-AA
Water Pump Pulley
F7AZ-6B209-CB
Tensioner
F7ZZ-8620-AA
Belt
N807336-S2
Studs
F7ZZ-19A439-AA
Tensioner Positive Stop
N804178-S309
Nuts
F7ZZ-3E523-AA
Power Steering Orientation clip
F7ZZ-3A733-AA
Power Steering Pulley
OTHER APPLICABLE ARTICLES: NONE
SUPERSEDES: 97-14-10
WARRANTY STATUS: Eligible Under The Provisions Of Bumper To Bumper Warranty Coverage
OPERATION
DESCRIPTION
TIME
971712A
Repair As Outlined - 4.6L
0.9 Hr.
DOHC
971712B
Repair As Outlined - 4.6L
0.7 Hr.
MFI
DEALER CODING
CONDITION
BASIC PART NO.
CODE
8509
42
OASIS CODES: 203100, 206000, 208000, 208999, 402000, 499000