Mustang V8-4.6L DOHC VIN R (2003)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
Antilock Control - Traction Control
Hydraulic Control Unit
Removal
1. Disconnect the battery ground cable.
2. Disconnect the anti-lock-brake control module electrical connector.
3. NOTE: The 4 Wheel Anti-lock Brake System (4WABS) with traction control is shown, the 4WABS without traction control system is similar
with one less hydraulic line. Plug brake lines to prevent any brake fluid loss.
Disconnect the brake lines from the Hydraulic Control Unit (HCU).
4. Remove the HCU bracket nuts to HCU.
