Mustang V8-4.6L DOHC VIN R (2003)
6. NOTE: The sensor may be seized to the axle. Use Rust Penetrant and Inhibitor F2AZ-19A501-A meeting Ford specification ESR-M99C56-A to
loosen the sensor for removal.
Remove the rear anti-lock brake sensor.
1
Remove the rear anti-lock brake sensor bolt.
2
Remove the rear anti-lock brake sensor.
Installation
1. NOTE: Be sure to apply High Temperature Nickel Anti-Sieze Lubricant F6AZ-9L494-AA meeting Ford specification ESE-M124A-A to the
sensor body where it will make contact when installed.
To install, reverse the removal procedure.
