Mustang V8-4.6L DOHC VIN R (2003)
9. Disconnect the fuel charging wiring harness from the rear of the lower intake manifold and remove the manifold.
10. Remove the intake manifold gaskets.
^
Clean and inspect the sealing surfaces.
Installation
1. Install the lower intake manifold gaskets.
2. Connect the fuel charging wiring harness to the rear of the lower intake manifold and install the manifold.
3. Install the intake manifold fasteners and tighten in the sequence shown.
4. Position the fuel charging wiring harness and connect it to the fuel injection supply manifold in three places.
