Mustang V8-4.6L DOHC VIN R (2003)
Exhaust Manifold: Service and Repair
Exhaust Manifold - RH
Exhaust Manifold RH
Removal and Installation
1. Disconnect the battery ground cable.
2. Raise the vehicle.
3. Remove the dual converter Y-pipe.
4. Remove the starter.
5. Remove the exhaust manifold.
1
Remove the nuts.
2
Remove the exhaust manifold.
3
Remove and discard the gasket.
6. To install, reverse the removal procedure.
^
Use a new exhaust manifold gasket.
^
Tighten the exhaust manifold nuts in the sequence shown.