Mustang V8-4.6L DOHC VIN R (2003)
17. Install the RH ignition coil cover and bolts.
18. Install the wiring harness retainers into the dash panel.
19. Connect the following connectors:
^
The 42 pin engine bulkhead electrical connector.
^
The 16 pin electrical connector.
20. Install the upper intake manifold.
21. Connect the battery ground cable.
NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive
strategy. The vehicle may need to be driven 16 km (10 mi) or more to relearn the strategy.
