Mustang V8-4.6L DOHC VIN R (2003)
10. Disconnect the oil pressure sender unit electrical connector.
NOTE: 4.6L 4V shown; 3.8L and 4.6L 2V similar.
11. Remove the battery ground cable nut at the engine block.
CAUTION: Failure to tighten the negative cable ground nut may cause ground circuit failure or arcing.
NOTE: 4.6L 2V shown; 3.8L and 4.6L 4V similar.
12. Remove the nut and disconnect the generator electrical connections.
^
Position the cover aside.
13. Remove the front lower cable harness bracket nuts.
NOTE: 4.6L 2V shown; 3.8L and 4.6L 4V similar.
