Mustang V8-4.6L DOHC VIN R (2003)
Special Tools
Special Tool(s)
Removal
1. Remove the drive belt.
2. Raise and support the vehicle.
3. Using the special tool, remove the pulley.
^
Inspect the pulley for paint marks in the web area near the hub. If there are two paint marks, discard and install a new pulley. If there is no
paint or one paint mark, use a paint pencil to mark the web area of the pulley near the hub.
Installation
1. Using the special tool, install a new pulley.
2. Install the drive belt.
3. Lower the vehicle.