Mustang V8-4.6L DOHC VIN R (2003)
2. Install the torque converter housing plug.
3. CAUTION: If installing a new filter, and the seal remains in the main control bore, carefully use a small screwdriver to remove the seal. Use care
not to damage the main control bore.
NOTE: If transmission is being repaired for a contamination-related failure, use a new filter and seal. The filter may be reused if no excessive
contamination is present.
Install a new fluid filter and seal as required.
4. Position the pan magnet into the transmission fluid pan.
5. NOTE: The transmission fluid pan gasket is reusable. Clean and inspect for damage; if not damaged, the gasket should be reused.
Install the transmission fluid pan and gasket.
1
Position the transmission fluid pan and gasket.